January 2010
- 1 Erynn jointing the boards
- 10 Alternating the strips for a checkerboard effect
- 11 All systems go
- 12 Gluing
- 13 Straightening everythings up
- 14 Lots of clamps to hold everything together
- 15 Leave it to dry overnight
- 16 Take a break with Cupcake
- 17 True up the ends on the jointer
- 18 more trimming
- 19 Erynn sanding on the end grain for hours
- 2 Doug cutting the strips
- 20 Clamping guides to rout out handles
- 21 Erynn routing the handles
- 22 Doug rounding the edges
- 23 Rounded edges with handles
- 24 Router action shot
- 25 The finished cutting board
- 3 More strip cutting
- 4 Gluing up the blocks
- 5 smoothing out the glued boards with a planer
- 6 Squaring up the block
- 7 Cutting the second set of strips from the block
- 8 More strips
- 9 Trial fit