BOAT IS DONE
Hatch Cover Installed
Stripe Done
Masking Stripe2
Masking Stripe1
Primer on Outer Hull
More Sanding and Bondo Outer Hull3
More Sanding and Bondo Outer Hull2
More Sanding and Bondo Outer Hull1
Sanded Bondo and Touch Up on Outer Hull2
Sanded Bondo and Touch Up on Outer Hull1
Lots of Bondo on outer hull
Outer hull sanded and ready for Bondo
Outer structure finally really done
Pin hole filled and new layer of fiberglass applied then wrapped
Starboard side ready for Bondo
Port side sanded and ready for Bondo - and found another small pin hole closer to bow
Starboard side structural repair complete
Port side structural repair complete
Final layer all wrapped up for the night
Final layer of fiberglass and epoxy applied
I decided to cut into the starboard side again to reduce high spots I was not happy with
Port side sanded and ready for last layer
Port side de-lamination fixed
Port side wrapped for first time
Port side ready for first application of epoxy
New Piece of Nomex on Port Side
Delamination pulled back on port side
Port Side Sanded
Starboard side ready for last layer
Kevlar patches wrapped - starboard side
Kevlar patches in holes starboard side
Soft areas glued down
Starboard side soft areas glued and clamped
Starboard Side Sanded for Gluing Down Soft Areas
Hull Damage Starboard Side
Hull Damage Port Side
Deck Bondo touch up - 2nd application
Deck Bondo Sanded - 1st application
Deck Slathered in Bondo
Deck top completely sanded
Ely dent repaired
Deck Structural Repair Finished
Band Aid for The Ely
Clamping repair of second half of top deck cracks
Second half of top deck cracks sanded
Result of repair to deck seams and first half of cracks
Deck seam and half of deck cracks clamped
Electrical tape to deck seam
Kevlar Epoxy and Wax Paper on Deck Seam